034Motorsport Streetsport Engine/Transmission Retrofit Kit For 8P Audi A3 VR6, 8J Audi TTRS & TT VR6, And MKV Volkswagen R32
Ships free in the US
Make sure this fits your car
Fits: RS3 8V/8Y
- Shop tested in Dallas
- Free pickup in Dallas
- Installs at our shop
PRODUCT DESCRIPTION:
The Motorsport Line StreetSport Motor Mount Retrofit Kit for the PQ35 chassis is designed to convert your existing TrackSport Motor Mounts into StreetSport Motor Mounts. These heavy-duty mounts will result in a moderate increase in noise, vibration, and harshness (NVH) transfer into the cabin, as they are designed to drastically reduce engine movement compared to the factory parts, but will introduce less NVH than our TrackSport mounts due to the lower-durometer rubber used. Additional NVH is most noticeable at idle, but once the vehicle is moving, NVH is only slightly higher than stock.
BUYER'S GUIDE:
The following guide is designed to help customers choose which mount best meets their specific needs.
| StreetSport | TrackSport | |
| Power levels exceeding Stage 1 | Power levels exceeding conventional stages | |
| Car is launched or taken to HPDE or Drag events | Car is heavily launched at drag strips or only used for track events | |
| Car is used on road as a commuter | Ultimate performance and rigidity is desired | |
| Less NVH is desired | "Where we're going, we don't care about NVH!" |
HARDWARE REQUIREMENTS:
This product is intended to be used in conjunction with one of the following products. The mount bases of the kits shown below are swapped with the mount bases in this kit, resulting in the same spec as our StreetSport mounts.
- 034-509-5013: MOTORSPORT TRACKSPORT ENGINE/TRANSMISSION MOUNT PAIR, 8J AUDI TTRS 2.5 TFSI 6-MT, BILLET ALUMINUM
- 034-509-5015: MOTORSPORT TRACKSPORT ENGINE/TRANSMISSION MOUNT PAIR, 8J/8P AUDI A3/TT 3.2L & MKV VOLKSWAGEN R32, BILLET ALUMINUM
- 034-509-5016: MOTORSPORT TRACKSPORT ENGINE/TRANSMISSION MOUNT PAIR, MKV/MKVI VOLKSWAGEN GOLF/JETTA/GTI/GLI & 8J/8P AUDI A3/TT 2.0T, BILLET ALUMINUM
FEATURES:
- Converts TrackSport Mounts to StreetSport Mounts to Lower NVH
- Manufactured from 6061-T6 Billet Aluminum
- Anodized for Long Life and Great Looks
- Extreme-Duty for the Most Punishing Performance Applications
- Great Solution for Highly-Tuned Stock Turbo Power Levels
- Replaceable 50 Durometer Density Line Rubber Bushings with Void-Free Construction
- Significantly Less NVH than TrackSport Versions
- Virtually Indestructible
- Lifetime Warranty
- Updates One Set of Engine/Transmission
NOTES:
Lifetime warranty covers replacing Density Line rubber bushings should they ever wear out, and replacement of any billet aluminum component in the unlikely event of a failure.
Listed for these cars. Check the title and description for exact years, body styles and drivetrain.
| Make | Model | Chassis | Years | Fits |
|---|---|---|---|---|
| Audi | RS3 | 8V/8Y | 2017+ |
Not sure? Call or text 945-954-1142 with your car or VIN.
- Free US shipping on orders over $250.
- Free pickup at our Dallas shop, usually ready within 24 hours.
- Unused parts can be returned within 30 days. Tunes, opened electronics, merch and installed parts are final sale.
- Want it installed? Book the install at thegbmotors.com.
Full details are on our shipping and returns page.
More for your build
034Motorsport Billet Spherical Dogbone Mount Performance Pack without Dogbone Pucks, Audi 8V.5 RS3 and 8S TTRS
034Motorsport Billet Aluminum Catch Can Kit for Audi 8S TT RS
034Motorsport Billet Spherical Dogbone Mount Performance Pack with Dogbone Pucks, Audi 8V.5/8Y RS3 and 8S TTRS
