MMX Lifetime Oil Service Kit For BMW B57 & B58 Engines

This MMR Performance lifetime oil filter kit brings together three essential B58 upgrades: a high-performance stainless steel reusable oil filter, a matching billet oil filter housing cap, and a magnetic oil pan drain plug.

So why upgrade to these three high-performance lifetime replacements? First of all, the high-performance stainless steel oil filter gets rid of the notorious B58 oil filter disintegration problem forever. By replacing the factory paper filter element with MMR’s advanced high-flow, high-filtration stainless steel filter unit, you will protect your engine from the big bills (and potentially worse) caused by the OE filter’s well-documented collapse failure.

As well as this exceptional filtration, the filter material allows for five times the flow of comparable paper oil filters. Its design provides consistent filtering across the entire filter surface.

As the perfect complement to your new filter, the billet oil filter housing is a direct replacement housing that replaces the cheap plastic oil filter housing which is fragile and often cracks, leading to oil leaks. Of course, the gloss-black, solid billet of 6061 aerospace-grade aluminum is beautiful in the engine bay, but it's certainly not just about the looks. An integrated pressure control oil bypass is built into the MMR housing, meaning there is no need to transfer the OE plastic bypass valve from the OE filter housing to MMR filter housing.

The last piece of this kit is MMR Performance’s best-selling magnetic oil pan drain plug. It’s one of the simplest yet most effective upgrades that you can install into your engine to increase its lifespan. As an engine wears, tiny metallic particles become suspended in the oil, accelerating wear each time you drive. Our magnetic sump plugs will help to separate these ferrous particles.

All three parts are beautifully over-engineered in customary MMR fashion to give an exquisite feel and exceptional product experience. Fitting is straightforward and of course, is best done in conjunction with your next Oil and Filter change. Just remove the factory parts, and fit the MMR direct replacement units back in place.

The MMR Oil Filter is a lifetime reusable filter. But to reuse and avoid any future loss of filtration or oil flow, it is essential that it is thoroughly cleaned at each oil change as follows:

1. Remove MMR Oil Filter from filter housing
2. Remove 3x O-rings from MMR Oil Filter prior to Step 3, as fuel will degrade and cause damage to these rubber/Viton components.
3. Soak the filter in one of the following fluids for 5-10 minutes – Gasoline, carb cleaner, or soap and water
4. Agitate/stir every few minutes until the outer surface is free of any engine debris
5. Dry the filter using compressed air, blow air through the filter, (do not press the compressed air gun against the filter, keep at least a 10mm gap from nozzle to filter) starting from the inside out, then at an angle on the outside of the screen to further remove any remaining particles or cleaning solution.
6. Once dry, reinstall o-rings (MMR advises replacement of these o-rings every oil service) and refit into oil filter housing and engine.

• Free US shipping on orders over $250.
• Free pickup at our Dallas shop, usually ready within 24 hours.
• Unused parts can be returned within 30 days. Tunes, opened electronics, merch and installed parts are final sale.
• Want it installed? Book the install at thegbmotors.com.

Full details are on our shipping and returns page.