Skip to content
TTE TTE1000 VTG 991 Upgrade TurboChargers, photo 1 of 1

TTE TTE1000 VTG 991 Upgrade TurboChargers

From$6,225.93 Available

Ships free in the US

Make sure this fits your car

Fits: 911 991

Turbo: Select one
Choose Option: Select one
1
  • Shop tested in Dallas
  • Free pickup in Dallas
  • Installs at our shop
Questions about fitment?Call or text 945-954-1142. We respond same day.
Product information "TTE1000 VTG 991 UPGRADE TURBOCHARGERS"

PORSCHE 991 & 991.2  TURBO / TURBO S TTE1000 VTG UPGRADE TURBOCHARGERS

Sending turbos to TTE for upgrade ~:  Please select if you are sending GEN1 or GEN 2 turbos for the upgrade process (sending GEN 1 cost more as extra parts are required)  *New units this option does not apply

*IMAGES SHOWN ARE OF CUSTOMER SUPPLIED RECONDITIONED UNITS

Welcome to our TTE1000 VTG Stage 3+ Turbos for the 3.8-litre flat 6 engine. To construct a pair of TTE1000 VTG we take Gen 2 turbo's and change the original compressor and employ a far larger and more efficient billet wheel and mill the compressor cover to the optimum gap to match the new compressor profile and 64mm TTE billet bell mouth intake adapters for direct connection to DO88 Silicone intake hoses.  We also fit larger 9 blade exhaust turbines and unlike the competitors we also fit TTE High-Flow VTG mechanisms & CNC port the turbine housing for greater flow and lower exhaust gas temperatures . 

 

Equilibrium


Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled, and then the CHRA are dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with a serial numbered balance test result document.

  • Original BWTS Gen 2 turbocharger as the base parts
  • TTE Billet Milled compressor 7+7 BLADE 55.5mm Inlet
  • TTE High-Flow 9 blade Turbine 53mm Outlet
  • TTE High-Flow VTG mechanism of larger size
  • CNC ported exhaust housing after the turbine
  • 1000 PS Proven 
  • TTE Billet CNC bell mouth inlet adapters O-Ring sealed
  • Plug & Play installation (with DO88 upgrade silicone turbo intakes Article Nr: DO88-KIT179S)
  • Proven TheTurboEngineers quality
  • Single parts finely balanced then components assembled and core high-speed VSR balanced
  • Supplied with a balance test result document
  • Made in Germany
  • Price shown is for a PAIR of turbochargers 

Please check out our TTE HEAT SHIELD ISOLATION ADD-ON option that’s available.  

 991 TURBO S TTE1000VTG 98RON FUEL 805WHP 

Sending Your Turbocharger

You are responsible for sending your turbo, follow the instructions below.

Be sure to place your invoice inside the package/s.

If you have twin turbochargers then package separately to avoid damage and place the packaging slip inside box.

Turbochargers must be in good working order and free from damage, any turbochargers sent with damage may incur extra charges*

Please do not send any accessories, oil lines, valves, hoses, parts, or components apart from the turbocharger and actuator as we will not be responsible for any losses or breakages of parts.  

Pack any turbocharger individually and extremely well to avoid any transit damage, double boxing is recommended. We also recommend adding double shipping labels to the outside of your package and place one inside to ensure your package does not become lost. 

We recommend using only DHL, UPS, FEDEX carriers. Please send using Express Service ONLY. Using other carriers or non-express will likely cause parcel delays at customs if sending from outside the EU and possible extra fees or return to you. 

Once you have sent your turbocharger/s to TheTurboEngineers they will be fully checked and validated if they are ok to be upgraded within a 2 week timeframe. Once approved for an upgrade they will continue with the process. If for any reason they can not upgrade your turbocharger/s e.g. damaged. We will contact you. 

If turbochargers arrive at TheTurboEngineers without a Packaging Slip they will not be upgraded and will be delayed. 

Sending goods to The Turbo Engineers GmbH Germany from outside the European Union make sure that:

1. Send the goods with a courier service like UPS, TNT, DPD, DHL (Express Service ONLY)

2. Please declare reasonable value when sending goods.

3. Any import duties or fee's that the package may incur upon delivery to TheTurboEngineers will be charged to you the customer. 

4. TTE EROI DE956667544498380 / TTE VAT ID DE299522945 is on shipping documents if required. 

Please understand that we are not able to pick up any goods from our local customs office ourselves and goods will be returned to the sender.

All goods that are sent with local post services or don't have a decent declaration of value (invoice) will be delivered to our local customs and we are not able to pick this up so will be returned to the sender.

Send Your Turbocharger/s To:

THETURBOENGINEERS GMBH

ROBERT-BOSCH-STRASSE 5A 85221 DACHAU

DEUTSCHLAND

TELEFON: 081315794912

The Fee

Turbocharger Inspection Fee - $150.00

This fee is for TheTurboEngineers to inspect and validate if the turbocharger is in a reasonable state to be upgraded. If turbocharger is free from damage and defects the upgrade will proceed and you will not be charged this fee.

If the turbocharger is damaged or has defects which do not allow the turbocharger to be upgraded a fee for the inspection will be charged, a deduction from the refund of the original purchase will be made and the turbocharger will be shipped back to the original delivery address. No shipping costs will be refunded.